Multiplexers

Overview
This product can be managed when attached on a network with a SNMP/WEB/Console mangement console card.

Fibridge Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX Fibre optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. With its SNMP manager, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps.

Hardware Function

• Support 10Base-T, 100Base-TX, 100Base-FX
• Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x st andards
• Up to 5km distance on multi mode optical port and 120km distance on single mode optical port
• High-performance auto-negotiation chips make sure the data transfer with higher
• Security, stability and without block.
• Up to 1916 bytes package forwarded
• Support half/full duplex mode Auto-negotiate
• Low power consumption, low heat generation and excellent compatibility
• 10Watt professional communication power supply module inside the standalone.
• Chassis supports double redundant power supply modules and each power supply module
• Supports up to 100 Watt power output for the security and stability
• Support hot-swap for all the modules, but not including management module
• Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable

Software Function

• Support local and remote management
• Support Console, WEB and SNMP management
• Show details of system information, including chassis name, location information, IP address, start-up time, software and hardware version
• View & configure the working status of local chassis and remote standalone device, including connection status, speed, half/full duplex mode, port status
• Set the speed limitation from 0Mbps to 70Mbps by step of 32Kbps
• Support remote loop back function, three loop back position selectable. Help to find out the line fault conveniently
• Summarize the data flow information and show the communication state of each port
  Support SNMP management. Set Trap Destination and Community Name, including the authority
• Reset the system or a single module or the remote end device via management software
• Reset chassis to factory default
• Support online firmware upgraded
• Show the detailed information of power supply, including AC/DC type and running status
• Provide MIB file, make it easy to be integrated into the third party SNMP management software
• Adopt the centralized management style and the tree-view catalogue, which can manage many sets of chassis at the same time in one single window. Meantime, it's very easy and clear to manage all devices even if many chassis in one window.

Specifications

• Device Size
  Standalone: 132mm (width)*36mm (depth)*122mm (height)
  19-inch Chassis: 440mm (width)*125mm(depth)*250mm(height)
• Power
  AC: 220VAC+-20%, 50/60Hz
  DC: -40~-57 VDC
  Power consumption: Standalone < 3W, Chassis full of modules < 50W

Typical Application

Typical Order Information
F2-M32CA Multimode 1310nm, SC/PC, Standalone, 220VAC power supply
F2-M31CD Multimode 850nm, SC/PC, Standalone, -48VDC power supply
F2-S3042CA Singlemode 1310nm, 40Km, SC/PC, Standalone, -48VDC power supply
F2-S3082CA Singlemode 1310nm, 80Km, SC/PC, Standalone, 220VAC power supply
F2-S3042TM Singlemode 1310nm, 40Km, ST/PC, Module
F2-W3042CA Singlemode & singlestrand, TX-1310nm, 40Km, SC/PC, Standalone, 220VAC
F2-W3043CA Singlemode & singlestrand, TX-1550nm, 40Km, SC/PC, Standalone, 220VAC
F2-W3042CM Singlemode & singlestrand, TX-1310nm, 40Km, SC/PC, Module
F2-W3043CM Singlemode & singlestrand, TX-1550nm, 40Km, SC/PC, Module

For more order models, please contact us.